Autonics Photoelectric Sensor, Photoelectric Type BRQT400-DDTA Stroke absorption_03^7 Type of Product : Spherical

Type of Product : Spherical Roller Bearing Inside Diameter (d) (mm) : 45 Outside Diameter D (mm) : 85 Width Dia mm : 23 Model No : 22209EAD1

protected access to deep-set screws

Bolt Diameter (mm): 8 - 10

5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 200 A at 50 °C Protection type Overload protectionShort-circuit protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 10000 cycles Electrical durability Category A: 5000 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 35 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 165 mm Width 105 mm Depth 60 mm Environment Standards EN/IEC 60947-1GB/T 14048

Autonics Photoelectric Sensor, Photoelectric Type BRQT400-DDTA Stroke absorption_03^7 Type of Product : SphericalSensing type Diffuse reflective type Sensing distance 400mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(4, 2m) Environment_Ambient illumination Sunlight: Max.